Η επιχείρηση χρηματοδοτήθηκε από τη Δράση του Προγράμματος Ανταγωνιστικότητα (ΕΣΠΑ 2021-2027) "Βασικός Ψηφιακός Μετασχηματισμός" της Δέσμης Δράσεων "Ψηφιακός Μετασχηματισμός ΜμΕ".

Η Δράση στοχεύει στην κάλυψη βασικών αναγκών των ΜμΕ με σύγχρονες τεχνολογίες πληροφορικής και επικοινωνιών που συνεισφέρουν σε μία εξωστρεφή, καινοτόμα και ανταγωνιστική παραγωγή προϊόντων ή υπηρεσιών.

audio-technica_logo-st.jpg AT33PTG/II

AT33PTG-st.jpg

Advanced nude tapered boron and weight reduction

This model succeeds in thinning down and shortening the cantilever, compared to the AT33PTG. The coil impedance is also refined from 17W to 10W. We realized significant weight reduction of the vibration system and successfully improved the basic performance and sound quality of the cartridge.

High performance and long-life MicroLinear™ stylus

MicroLinear™ (ML) is a specially polished line contact stylus. This has better high range performance than the conical or elliptical stylus due to its small curvature radius and realizes low distortion and expanding high range reproduction even when playing at the inner circumference of records. And the constancy of the line contact shape is one of its main features with an average product lifetime of around 1000 hours.

Belongs to the series: Audiophile Moving Coil cartridges

View it in the official brand website

Type: Dual Moving Coil

Frequency Response: 15 to 50,000 Hz

Channel Separation: 30 dB (1 kHz)

Channel Balance: 0.5 dB (1 kHz)

Coil Impedance: 10 W (1 kHz)

DC Resistance: 10 W

Vertical Tracking Angle: 23 degrees

Recommended Load Impedance: Min 100 W

Coil Inductance: 22 mH (1 kHz)

Static Compliance: 40 x 10 – 6 cm / dyne

Dynamic Compliance: 10 x 10 – 6 cm / dyne (100 Hz)

Output Voltage: 0.3 mV (at 1 kHz, 5 cm/sec)

Stylus Shape: MicroLine™

Cantilever: Gold-plated solid boron

Stylus Construction: Nude square shank

Mount: 1/2” centers

Dimensions: 16.0 (H) x 16.6 (W) x 26.5 (L) mm

Weight: 6.9 g

Accessories: 1 non magnetic screw driver; 2 washers; 2 Nuts; 2 x 13 mm mounting screws; 2 x 19 mm mounting screws; 1 plastic protector; 1 set of PCOCC Lead Wires(AT6101)