Η επιχείρηση χρηματοδοτήθηκε από τη Δράση του Προγράμματος Ανταγωνιστικότητα (ΕΣΠΑ 2021-2027) "Βασικός Ψηφιακός Μετασχηματισμός" της Δέσμης Δράσεων "Ψηφιακός Μετασχηματισμός ΜμΕ".

Η Δράση στοχεύει στην κάλυψη βασικών αναγκών των ΜμΕ με σύγχρονες τεχνολογίες πληροφορικής και επικοινωνιών που συνεισφέρουν σε μία εξωστρεφή, καινοτόμα και ανταγωνιστική παραγωγή προϊόντων ή υπηρεσιών.

smelogo.gif MODEL-20/3 (without arm)

Model20-3-b-st.jpg

Massive construction, extensional damping of major surfaces and lack of vibration from moving parts ensures exceptional detail, resolution and uncoloured performance. Model 20/3 weighs approximately 28.6Kg (63lb), significant in  relation to its size because it is density that matters.
The sub-chassis measures only 440mm (17 5/16”) by 350mm (13 ¾”) but weighs 11Kg (24lb). Its thickness 16mm (5/8”) resists flexing at low frequencies whilst high frequency resonance is attenuated by efficient extensional damping. Model 20/3 is equipped for but not including SME precision pick-up arm.

View it in the official brand website

Four point suspension for stability.

Sub-chassis suspended on eighty strands of rubber in the form of forty purpose moulded ‘O rings.

Suspension adjustable through trimmers used in conjunction with a gauge to give recommended settingsor varied to suit individual conditions.

Central fluid damper controls sub-chassis motion and offers resistive ground-path for acoustic signals.

Two screws lock down the sub-chassis and seal the damper for transport.

19mm diameter main spindle machined from high - chrome steel, hardened, ground and super finished runs in a sealed oil bath for lifetime lubrication.

Screw down reflex record clamping system minimises record resonance.

6.5Kg (14lb) platter with unique Isodamp face machined with a fine scroll for optimum record interface.

Generous use of extensional damping and resistive loop construction ensure sonic neutrality.

Optional mounting on steel ball feet or compliant inserts, both affording levelling adjustment.

Four jacking screws built into the sub-platter allow the thrust bearing to be off loaded for transit.

The Power Supply design incorporates a 4-layer surface mount technology pcb with on-board user adjustable speed variation control.

Large diameter strobe disc supplied allows precise adjustment of standard speeds.

Speed range: 33 1/3, 45 & 78 rpm.

Fully shielded in-line control unit. LEDs indicate themain functions